SKU PISTONKIT-TSP-300TBI Category Tags ,

TSP Top End Rebuild Kit – KTM & Husky 300cc TBI Models

7 reviews Add your review

Everything you need to rebuild the top end on your 2023+ KTM & Husky 300cc TBI models.


Tick the checkbox to add to your order. Quantities can be changed.
TSP ERM - ECU Reflash Module
TSP ECU Re-flash
TSP ECU Re-flash - KTM & Husky 300 TBI
TSP Oversized Powervalve Cover
Crank Case Pressure Sensor - TPI Models
SBMP Oil Pump Delete Kit
twin air filter

Model Validator - Please enter your bike info before adding to cart


TSP Top End Rebuild Kit – 300cc TBI Models

This TSP Top End Rebuild Kit will fit KTM and Husky TBI 300cc Models. This is a complete top end rebuild kit that comes with everything you need to rebuild the top of of your 300 TBI two stroke.

The TSP Top End Rebuild Kit includes:

  • Meteor piston kit with your choice of an A, B or C piston size. Piston kit includes rings, pin, circlips and a high quality cast piston. These pistons are made by Meteor in Italy and are THE BEST available. The current Meteor piston features a special coating on the crown to reduce temps of the incoming charge and reduce detonation. This is a cutting edge piston developed especially for KTM.
  • Top end gasket kit.  Includes two gaskets to achieve the stock 0.60mm thickness base gasket, power valve cover gaskets, copper washers and O-rings. All O-rings are the correct size and made from the correct material, unlike the cheaper aftermarket kits.
  • TSP little end bearing
  • EZ clips free of charge ($20 value) for ease of piston installation

TSP rebuild kits are put together by TSP using parts sourced direct from OEM manufacturers in Japan and Europe. The parts we select are THE BEST available for each make/model and many are the exact same parts as the genuine items.

Piston Sizing: ideally you should measure your bore with a dial gauge to work out the correct piston sizing. If you cannot do this then a general rule of thumb is to install an “A” piston on any new cylinder or a cylinder that was just replated.  Install a “B” piston on the first top end rebuild between 80 – 90 hours. Install the “C” piston on the second top end rebuild at 150+ hours.  The 300 C piston kit is unique to the TSP Top End rebuild Kit collection. TSP recommends a minimum piston to cylinder bore clearance of 0.07 mm.

Piston Diameters:

  • A Piston = 71.93 mm
  • B Piston = 71.94 mm
  • C Piston – 71.95 mm

7 reviews for TSP Top End Rebuild Kit – KTM & Husky 300cc TBI Models

  1. Jarred Stone (verified owner)

    Quick and fast shipping. Actually had the top end kit on hand and didn’t have to wait months. Friendly service, I’ll be ordering here again. Thanks!

    (0) (0)
  2. Mike McCallum (verified owner)

    (0) (0)
  3. Ped (verified owner)

    Always responded promptly after the sale with technical questions and issues. Will use them again.!

    (0) (0)
  4. Jarred Stone (verified owner)

    I am a repeat customer because South Bay Moto Performance continues to deliver excellent products and great prices quickly to my doorstep. Thanks!

    (0) (0)
  5. Brian Ward (verified owner)

    Great parts, great people. Also bought the tsp and erm kit for my 21 300xc, no complaints.

    (0) (0)
  6. ANTONIO O. (verified owner)

    Fast service

    (0) (0)
  7. Jeff R. (verified owner)

    Everything needed to freshen up the top end on my TE300. This kit is great. The EZ-clips are especially appreciated. Thanks!

    (0) (0)
Add a review

Your email address will not be published. Required fields are marked *

Below are the make(s) and model(s) that will fit this part.

YearMakeEngine CCModel
YearMakeEngine CCModel
2023Husqvarna300TX TBI
2023KTM300SX TBI
2023KTM300XC TBI
2024Gas Gas300EX TBI
2024Husqvarna300TE TBI
2024Husqvarna300TX TBI
2024KTM300SX TBI
2024KTM300XC TBI
2024KTM300XC-W TBI

You may also like…

Scroll to top
Your subscription could not be saved. Please try again.
Your subscription has been successful.

Sign up for SBMP Moto Newsletter to receive periodic updates on new products, reviews, and ride reports.