Shop

TSP CNC Head – 2019+ KTM/Husky/Gas Gas 300 TPI Models

1 review Add your review

Our new TSP CNC cylinder heads are machined from solid 6061 T6 stock and offer improved performance, reliability and fuel economy. They are the best bolt on mod you can buy for your bike! Our design offers better heat dissipation than many other 2 piece designs due to the large lower section which incorporates the combustion chamber.  This allows heat from combustion to disperse over a larger area than other 2 piece designs for improved heat transfer to the coolant. All TSP heads also include a complete head gasket kit.

$320.00

Low
Medium
High
Very High
Low (+$150.00)
Medium (+$150.00)
High (+$150.00)
Very High (+$150.00)
TPI Injector Relocation Kit (+$180.00)
Crank Case Pressure Sensor (+$55.00)
Oil Pump Delete Kit (+$40.00)
Top End Rebuild Kit (+$250.00)
TPI Map Switch (+$35.00)
Gasket Kit (+$25.00)
Fuel Filter (+$30.00)
Fuel Fitting (+$30.00)
Twin Air Filter (+$30.00)
Additional Spark Plug (+$15.00)
Hose Guards - Black (+$15.00)
Product total
Options total
Grand total

Model Validator - Please enter your bike info before adding to cart

SKU: HKT300.17on Category:

Description

Please be sure to specify your make/model/year in the Model Validator. Select your desired compression ratio from the drop down menu. All designs will work with stock base gaskets and cylinder heights and offer significant improvements over stock heads. This head is the same as our 300 Carb heads, without the temp sensor hole cover.

All TSP heads and inserts now include a complete head gasket kit including inner and out cylinder o-rings and head bolt crush washers. Everything you need to install your new TSP head or insert with all new o-rings and seals.

LOW COMPRESSION – this head was designed to suit extreme enduro riding or for riders who are more interested in smoothness over power gains.  It offers strong bottom end torque with a very smooth delivery that won’t break traction too easily. It enables the rider to use lower revs and less clutch when tackling hard obstacles.

MEDIUM COMPRESSION – this head is our top seller for the 300 and suits the majority of trail riders and racers who want better bottom and mid power and a small gain up top as well. The power delivery is much stronger and more tractable than stock and suits a wide range of riding conditions. best suited to run on 91 octane fuel from sea level up to 4,500 ft.

HIGH COMPRESSION – this head and suits riders who want harder hitting power everywhere, especially down low.  It completely transforms the TPI into a weapon. Also best suited for normal trail riders who live at higher elevation from 4,500 ft and above. Best with 91 octane fuel.

VERY HIGH COMPRESSION – this head design suits very high elevation riding above 6,000 ft. When used at the appropriate elevation it will give similar results to the Medium or High Compression heads near sea level.

Our new TSP CNC cylinder heads are machined from solid 6061 T6 stock and offer improved performance, reliability and fuel economy. They are the best bolt on mod you can buy for your bike! Our design offers better heat dissipation than many other 2 piece designs due to the large lower section which incorporates the combustion chamber.  This allows heat from combustion to disperse over a larger area than other 2 piece designs for improved heat transfer to the coolant.

These CNC machined 2 piece heads feature TSP’s proven combustion chamber designs and are a MUST HAVE mod for most current model off-road bikes. Our combustion chamber designs have been used by thousands of happy customers and have been extensively dyno tested.  The gains are consistent and include: increased power throughout the rev range (especially bottom/mid), improved fuel economy, greatly reduced risk of detonation, increased top end life in many models, and much SMOOTHER power delivery.

The unique CNC design has been 100% developed, machined and tested in-house at TSP.

These CNC heads will bolt onto your standard cylinder and are designed to work with standard base gaskets. If you are unsure of your current base gasket thickness we can advise the correct thickness to achieve the necessary cylinder height and squish clearance.

 

Additional information

Weight 1.5 lbs
Options

Low Compression, Medium Compression, High Compression, Very High Compression

1 review for TSP CNC Head – 2019+ KTM/Husky/Gas Gas 300 TPI Models

  1. Seth James (verified owner)

    Really awesome product really helped my bike.

    (0) (0)
Add a review

Your email address will not be published. Required fields are marked *

Below are the make(s) and model(s) that will fit this part.

Year Make Engine CC Model
Year Make Engine CC Model
2019 Husqvarna 300 TE-i
2019 KTM 300 XC-W TPI
2020 Husqvarna 300 TE-i
2020 Husqvarna 300 TX-i
2020 KTM 300 XC TPI
2020 KTM 300 XC-W TPI
2021 Gas Gas 300 EC TPI
2021 Gas Gas 300 EX TPI
2021 Husqvarna 300 TE-i
2021 Husqvarna 300 TX-i
2021 KTM 300 XC TPI
2021 KTM 300 XC-W TPI
2022 Gas Gas 300 EC TPI
2022 Gas Gas 300 EX TPI
2022 Husqvarna 300 TE-i
2022 Husqvarna 300 TX-i
2022 KTM 300 XC TPI
2022 KTM 300 XC-W TPI
2023 Gas Gas 300 EC TPI
2023 Gas Gas 300 EX TPI
2023 Husqvarna 300 TE-i
2023 KTM 300 XC-W TPI

You may also like…

Scroll to top
Your subscription could not be saved. Please try again.
Your subscription has been successful.

Sign up for SBMP Moto Newsletter to receive periodic updates on new products, reviews, and ride reports.