Tech Tips

TSP TPI Injector Relocation Kit Video

Dave from TSP goes through the details on the TSP TPI Injector Relocation Kit , including detailed information on the kit, advantages to installing, and rider feedback.

Continue reading >>

TSP 150cc TPI Injector Relocation Kit Installation Video

This video guides you through the process of installing the TSP TPI Injector Relocation Kit on your 2020+ TPI 150cc.

Continue reading >>

TSP Injector Relocation Kit (IRK) Installation Instructions

Installation guides and videos, along with some FAQs, for the installation of the TSP Injector Relocation Kit and the TSP Oil Pump Delete Kit.

We highly recommend taking the time to read the whole page including the FAQ as it may help you with your install and save potential easy errors. Even the highest level of mechanics have made some simple mistakes with this install, so please take care in reading the below sections. It is commonly mistaken that the injectors plugs are plugged in the wrong way around, or the crankcase pressure sensor and the ambient pressure sensor are the wrong way around when removing the oil tank. Please see the wiring diagram below to ensure all is connected correctly as it may have been reversed from factory.

 

Continue reading >>

TSP Oil Pump Delete Kit Installation Video

This video guides you through the process of installing our TSP TPI Oil Pump Delete Kit on your 2018-2023 TPI. Fits all models from 150cc to 300cc providing at least one of the injectors has been relocated to the intake. We strongly suggest you run this oil pump delete kit with our TSP Injector Relocation Kit for best performance and reliability.

Continue reading >>

TSP Injector Relocation Kit Installation Video

This video guides you through the process of installing the TSP TPI Injector Relocation Kit on your 2018-2023 TPI 250cc or 300cc.

Continue reading >>

Keihin Carburetor Installation

Steve walks through the Keihin 38 Air Stryker Short Body carburetor installation.
Continue reading >>

SBMP Aluminum Fuel Tank Fitting for KTM, Husky and Gas Gas 2 Stroke TPIs

SBMP Aluminum Fuel Tank Fitting for KTM, Husky and Gas Gas 2 stroke TPIs
Continue reading >>

Removing Throttle Body and Installing TSP Idle Screw

Step by step instructions on how to remove your throttle body from your TPI two-stroke, and how to install the TSP idle screw.
Continue reading >>

Adjusting TPS Voltage

This video describes how to check the volatage coming out of your TPI’s throttle body positioning sensor and how to adjust it using your TSP idle screw for an optimum idle setting.
Continue reading >>

How to install the TSP Power Kit

Removing your ECU and preparing it to ship to South Bay Moto Performance for the TSP reflash. Step by step instructions on how to install the Two Stroke Performance Power Kit on your two stroke TPI.
Continue reading >>

Scroll to top
Your subscription could not be saved. Please try again.
Your subscription has been successful.

Sign up for SBMP Moto Newsletter to receive periodic updates on new products, reviews, and ride reports.